WESM zl Management and Configuration Guide WT.01.XX and greater

4-18
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
Figure 4-11. Assigning WLANs to a BSSID in the Default Configuration
6. In the Primary WLAN drop-down menu, choose the WLAN for which the
radio should beacon the SSID.
7. If you want to assign more WLANs to the radio, select another BSSID and
repeat steps 5 and 6.
8. Click the Apply button.
Manually Assigning WLANs to a Specific Radio. Select this option to
alter the WLAN assignment on a specific radio. By assigning different WLANs
to different RP radios, you can:
■ establish different WLANs in different areas of the network
■ establish more than 16 WLANs in your network
■ have different RP radios beacon different SSIDs
To manually assign WLANs, complete these steps:
1. Select Network Setup > Radio and click the radio that you want to
configure.
2. Click the WLAN Assignment tab.