WESM zl Management and Configuration Guide WT.01.XX and greater

4-19
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
3. Click the Edit button. The Network Setup > Radio > Assign Wireless Lans to
Radios screen is displayed. (See Figure 4-12.)
Figure 4-12. Assigning WLANs to a Specific RP Radio
4. You can assign SSIDs either to the radio as a whole or to a specific BSSID.
For example, you could assign SSIDs to the radio if:
• you are assigning four or fewer WLANs to the radio
• you are assigning more than four WLANs, but you want the radio to
advertise the four with the lowest index numbers
Complete step 5 to assign SSIDs to the radio as a whole. Complete step 6
to assign SSIDs to a specific BSSID.
5. As shown in Figure 4-13, check the Assign box for each WLAN that you
want the radio (or radios) to support. You can select up to 16 WLANs, but,
as in normal mode, the RP radio only beacons SSIDs for the four WLANs
with the lowest index numbers.
Click the Apply button.