WESM zl Management and Configuration Guide WT.01.XX and greater

4-77
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 4-45. Enabling a WLAN
As long as you are operating in normal mode, all radios on all RPs that the
Wireless Edge Services zl Module has adopted or will adopt support the
enabled WLANs.
You can confirm that RPs are actually supporting the enabled WLANs by
selecting Network Setup > Radio and checking the WLAN Assignment tab. Select
an RP radio to view which SSIDs are mapped to that radio’s BSSIDs.
The radio also adds the enabled WLANs to the WLAN assignment for default
radio adoption configurations, which you can view by selecting Network Setup
> Radio Adoption Defaults and clicking the WLAN Assignment tab.
For example, Figure 4-46 shows the default configuration after you enable the
five WLANs shown in Figure 4-45.