WESM zl Management and Configuration Guide WT.01.XX and greater

4-100
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Note If you change the protocol for one queue, the setting automatically changes
in the other three queues for the WLAN; in other words, the setting applies to
the WLAN as a whole. (It does not make sense to use 802.1p to queue some
traffic, but queue other traffic according to DSCP.)
4. To restrict the number of stations allowed to use the settings for this
queue, check the Admission Control box and enter a value from 1 to 255.
This option is only available for the Voice and Video ACs.
5. Click the OK button.
Viewing Station WMM Parameters
From the Network Setup > WLAN Setup > WMM, you can also view the station
WMM parameters, which determine how WMM-enabled stations in a WMM-
enabled WLAN handle traffic placed in various ACs.