WESM zl Management and Configuration Guide WT.01.XX and greater

4-106
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Like other radio settings, you can alter:
■ the WMM queue parameters that the Wireless Edge Services zl Module
sends to newly adopted radios
■ the WMM queue parameters used by particular radios
To customize the RP WMM parameters, complete these steps:
1. Choose whether you are configuring parameters for any newly adopted
radio or for a particular radio:
• To configure settings for any newly adopted radio, select Network
Setup > Radio Adoption Defaults.
• To configure settings for particular radios, select Network Setup >
Radio.
2. Click the WMM tab. On the screen that is displayed (see Figure 4-62),
queues are listed depending on the configuration type:
• For the radio adoption default configurations, queues are listed on
the screen by radio type and access category—for example, 802.11a
and Background.
• If you are configuring WMM settings for particular radios, queues are
indexed according to radio number and queue number. For example,
in Figure 4-62, the Voice queue for radio 1 would be indexed 1/4.