WESM zl Management and Configuration Guide WT.01.XX and greater

6-5
IP Services—IP Settings, DHCP, and DNS
IP Settings
■ Status
This column reports whether or not the VLAN was created successfully.
■ Management Interface
Only one VLAN can be selected as the management interface, and that
VLAN is identified with a green check mark. All other VLANs show a red x
in the Management Interface field.
When secure management is enabled, you can access the Wireless Edge
Services zl Module’s Web browser interface only through the IP address
assigned to this VLAN. To enable secure management, click the Enable Secure
Management VLAN button at the bottom of the screen.
Assigning an IP Address to a VLAN
To assign an IP address to a VLAN, complete these steps:
1. Select Network Setup > Ethernet > Configuration.
2. Click the Add button at the bottom of the screen. The Add New screen is
displayed.
Figure 6-2. Add New Screen
3. In the VLAN ID field, enter the number of the VLAN.