WESM zl Management and Configuration Guide WT.01.XX and greater

7-29
Access Control Lists (ACLs)
Configuring ACLs
Viewing ACL Statistics
You should check ACLs and verify that they are selecting traffic as they should.
To view statistics for your ACLs, select Security > ACLs and click the Statistics
tab. You can alternatively select Security > ACL Statistics.
Figure 7-12. Security > ACLs > Statistics Screen
ACL statistics are displayed on the screen. (If you do not see any statistics,
you may need to edit your rules and check the Logging box.)
Each row provides information about one ACL rule:
■ Interface—the interface to which the ACL rule is applied (uplink, down-
link, VLAN, or tunnel interface)
■ Action—whether the module forwards selected packets or drops them
Refer to Table 7-6 for a key to the action ID.