WESM zl Management and Configuration Guide WT.01.XX and greater

9-20
Fast Layer 2 Roaming and Layer 3 Mobility
Configuring Layer 3 Mobility
Figure 9-8. Adding a Layer 3 Mobility Peer
3. Enter the peer’s IP address in the Add screen.
4. Click the OK button.
Repeat steps 2 through 4 to add multiple peers (up to 11).
Enabling Layer 3 Mobility
After configuring your Layer 3 mobility settings and specifying peers, you
enable Layer 3 mobility by completing these steps:
1. Select Network Setup > Layer 3 Mobility and click the Configuration tab.
2. Check the Enable Mobility box.