WESM zl Management and Configuration Guide WT.01.XX and greater

11-42
RADIUS Server
RADIUS Accounting
5. Configure settings for the primary accounting server in the Primary
column of the Accounting section.
a. Specify the server’s IP address in the Accounting Server Address field.
To use the Wireless Edge Services zl Module’s internal server for
accounting, enter 127.0.0.1. You can use the internal RADIUS server
for accounting both when the internal RADIUS server is the authen-
tication server and when an external server is the authentication
server.
b. Leave the default port: 1813.
c. You should not specify a key when you use the module’s internal
server. If you have already specified a key, erase the Accounting Shared
Secret field.
6. Optionally, configure settings for a secondary server by completing the
fields in the Secondary column of the Accounting section.
7. From the Accounting Mode drop-down menu, choose when the Wireless
Edge Services zl Module forwards a message to its internal server:
• Start-Stop—when a station connects to this WLAN and when it dis-
connects
• Stop-Only—only when a station disconnects
• Start-Interim-Stop—when a station connects to this WLAN, periodi-
cally for as long as the connection persists, and when the station
closes the connection
8. If you have selected Start-Interim-Stop for the Accounting Mode, enter a
value in the Interval field.
This setting determines how often, in seconds, the module sends periodic
reports on user activities. (It applies only when you select Start-Interim-
Stop.) The default value is 60 seconds, and the valid range is from 60 to
3600 seconds (1 hour).
9. Click the OK button.
10. In the WLAN’s Edit screen, click the OK button.
11. Click the Save link at the top of the Web browser interface to save the
changes to the startup-config.