WESM zl Management and Configuration Guide WT.01.XX and greater

12-93
Wireless Network Management
Network Self Healing
All RP radios adopted by this module are listed.
2. Select a radio and click the Edit button. The Edit Neighbor screen is
displayed. (See Figure 12-66.)
Figure 12-66.Editing Neighbors
The available RP radios—those adopted by this module—are listed on the
left under Available Radios: these are potential neighbors.
3. To add a neighbor, select a radio from the field on the left and then click
the Add button. The radio moves to the right; it is now the neighbor of the
radio that you are editing.
You can add up to 16 neighbors, including radios that use a different 802.11
mode than the radio for which you are selecting neighbors. Keep in mind,
however, that if the second radio’s wireless stations do not support the
other mode, then this radio cannot help them.
4. To remove a radio from the neighbor list, select that radio from the list on
the right and click the Remove button.
5. In the Self Healing Action field, use the drop-down menu to select the action
that this radio takes when a neighbor fails. Because you must also com-
plete this step when you use automatic neighbor detection, configuring
this setting is described in “Selecting the Self-Healing Action” on
page 12-95.