WESM zl Management and Configuration Guide WT.01.XX and greater

13-9
sFlow Agent
Configuring sFlow Using the Web Browser Interface
Appendix A: “ProCurve Wireless Edge Services zl Module Command Line
Reference.”) The other receiver instances (4, 5, and 6), you can configure
through the Web browser interface.
When you specify the receiver manually, you must configure a variety of
settings that the sFlow receiver would otherwise configure itself. These
settings include not only the receiver’s IP address and port, but also how the
module’s sFlow agent packages the samples.
Follow these steps:
1. Select Special Features > sFlow and select the Receiver tab.
Figure 13-2. Special Features > sFlow > Receiver Screen
2. The three receiver instances available for configuration through the Web
browser interface are listed by index number (4, 5, and 6). Highlight one
of the instances.
3. Click the Edit button. The Receiver Configuration screen is displayed.