WESM zl Management and Configuration Guide WT.01.XX and greater

A-56
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
Default Setting
N/A
Command Mode
Global
Example
access-list
This command adds an access control list (ACL) entry.
Syntax
access-list
(See switch reference.)
Default Setting
N/A
Command Mode
Global
Example
boot
This command reboots the wireless module.
Syntax
boot flash (primary | secondary )
• flash - Specifies the boot image to use after reboot.
– primary - Primary image.
– secondary - Secondary image.
Default Setting
N/A
HPswitch#aaa authentication login default local
HPswitch
HPswitch#access-list
HPswitch