WESM zl Management and Configuration Guide WT.01.XX and greater

A-67
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
Default Setting
Wireless Services
Command Mode
Global Configuration
Example
Related Commands
show hostname (page A-138)
interface
This command provides an interface selection to configure.
Syntax
interface (IFNAME | dnlink | tunnel | uplink | vlan)
• IFNAME vlan1 vlan4094, tunnel1 tunnel32, uplink / dnlink
• dnlink dnlink interface
• tunnel Tunnel interface
– <132> Tunnel Id
• uplink uplink interface
• vlan Vlan interface
– <14094> Vlan Id
Default Setting
N/A
Command Mode
Global
Example
HPswitch#configure
HPswitch(config)#hostname EXHOSTNAME
ProCurve(wireless-services-B)(config)#
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#