WESM zl Management and Configuration Guide WT.01.XX and greater

A-68
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
ip (global)
This command configures Internet Protocol (IP) parameters. The no com-
mand negates this configuration.
Syntax
ip (accesslist | defaultgateway | dhcp | dns | dnslookup | domain | http | local | nat |
route | routing | securewebmanagement | telnet | webmanagement)
• accesslist ACL Config
– extended Extended ACL
+ <100199> IP extended access list
+ <20002699> IP extended access list (expanded range)
+ WORD Name of ACL
– standard Standard ACL
+ <199> IP standard access list
+ <13001999> IP standard access list (expanded range)
+ WORD Name of ACL
• defaultgateway Configure default gateway
– A.B.C.D IP gateway address
• dhcp DHCP Server configuration
– bootp BOOTP specific configuration
+ ignore Configure DHCP Server to ignore BOOTP requests
– excludedaddress Prevent DHCP Server from assigning certain
addresses
+ A.B.C.D Low IP Address
- A.B.C.D High IP Address
– option Define DHCP server option
+ WORD Option name
- <0254> Option Code
++ ascii Specify the option type as ascii
++ ip Specify the option type as IP address
– ping Specify ping parameters used by DHCP Server
+ timeout Specify ping timeout
- <110> Ping timeout in seconds
– pool Configure DHCP server address pool
+ WORD Pool name
• dns Add a Nameserver to the DNS
– A.B.C.D IP address of Nameserver to add
• dnslookup Enable Domain Name Service (DNS)