WESM zl Management and Configuration Guide WT.01.XX and greater

A-72
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
Example
Related Commands
show licenses (page A-143)
logging
This command modifies message logging facilities. The no command negates
the logging configuration.
Syntax
logging (aggregationtime | buffered | console | faility | host | monitor | on | syslog)
• aggregationtime Set number of seconds for aggregating repeated
messages
– <160> Aggregation time in seconds
• buffered Set buffered logging level
– <07> Logging severity level
– alerts Immediate action needed (severity=1)
– critical Critical conditions (severity=2)
– debugging Debugging messages (severity=7)
– emergencies System is unusable (severity=0)
– errors Error conditions (severity=3)
– informational Informational messages (severity=6)
– notifications Normal but significant conditions (severity=5)
– warnings Warning conditions (severity=4)
• console Set console logging level
– <07> Logging severity level
– alerts Immediate action needed (severity=1)
– critical Critical conditions (severity=2)
– debugging Debugging messages (severity=7)
– emergencies System is unusable (severity=0)
– errors Error conditions (severity=3)
– informational Informational messages (severity=6)
– notifications Normal but significant conditions (severity=5)
– warnings Warning conditions (severity=4)
HPswitch#configure
HPswitch#licenses hardwareid radioports
The hardware Id for package radio-ports is
SG528WC011-H-EXAMPLE-8KJKPT6-T67XT6P-3GT8QJ9
HPswitch(config)#
HPswitch(config)#