WESM zl Management and Configuration Guide WT.01.XX and greater

A-76
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
ntp
This command enables user to configure NTP.
Syntax
ntp (accessgroup | authenticate | authenticationkey | autokey | broadcast | broadcastde-
lay | master | peer | server | trustedkey)
• accessgroup Control NTP access
– peer Provide full access
+ <199> Standard IP access list
+ <13001999> Standard IP access list (expanded range)
– queryonly Allow only control queries
+ <199> Standard IP access list
+ <13001999> Standard IP access list (expanded range)
– serve Provide server and query access
+ <199> Standard IP access list
+ <13001999> Standard IP access list (expanded range)
– serveonly Provide only server access
+ <199> Standard IP access list
+ <13001999> Standard IP access list (expanded range)
• authenticate Authenticate time sources
• authenticationkey Authentication key for trusted time sources
– <165534> Key number
+ md5 MD5 authentication
- WORD Authentication key
• autokey Enable NTP autokey authentication scheme
– clientonly Switch will be a client to other trustedhosts in the
autokey group
– host Configure the switch as a trusted host
• broadcast Configure NTP broadcast service
– client Listen to NTP broadcasts
– destination Configure broadcast destination address
+ WORD Destination broadcast IP address
- key Broadcast key
++ <165534> Key ID
- version NTP version
++ <14> NTP Version number
-- key Broadcast key
+++ <165534> Key ID