WESM zl Management and Configuration Guide WT.01.XX and greater

A-85
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
• <13> Select one of three possible sFlow receiver tables
– destination IP address of sFlow collector/management station
+ A.B.C.D IP address (e.g. 10.0.0.1)
-- 80211toethernet Sampled interfaces will emulate
Ethernet interfaces for sFlow collectors and management
applications that don't support the sFlow 802.11 extension
-- <165535> UDP application port of sFlow collector/manage-
ment station
+++ 80211toethernet Sampled interfaces will emulate
Ethernet interfaces for sFlow collectors and management
applications that don't support the sFlow 802.11 extension
– polling Specify the radios for which packets are to be polled
+ <11000> A single radio index
-- 0 Disable polling
-- <2065535> Specify the maximum interval (seconds)
between polling of counters
+ RADIO A list (eg: 1,3,7) or range (eg: 37) of radio indices
-- 0 Disable polling
-- <2065535> Specify the maximum interval (seconds)
between polling of counters
– sampling Specify the radios for which packets are to be sam-
pled
+ <11000> A single radio index
-- 0 Disable sampling
-- <5065535> Specify N, where 1/N is the number of packets
sampled
+ RADIO A list (eg: 1,3,7) or range (eg: 37) of radio indices
-- 0 Disable sampling
-- <5065535> Specify N, where 1/N is the number of packets
sampled
Default Setting
N/A
Command Mode
Global