WESM zl Management and Configuration Guide WT.01.XX and greater

A-99
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
- wireless-module - Modify wireless-module rate traps.
++num-stations-greater-than - Number of associated station is
greater than.
++pktsps-greater-than - Packets per second is greater than.
++tput-greater-than - Throughput in Mbps is greater than.
• host - SNMP server host.
– A.B.C.D - SNMP server host IP address.
• location - Text for MIB object sysLocation.
• manager - Enable SNMP manager.
– all - Enable SNMP version v2 and v3.
– v2 - Enable SNMP version v2.
– v3 - Enable SNMP version v3.
• user - Defines a user who can access SNMP engine.
– manager - Manager user.
+v3 - User using v3 security model.
- auth - Authentication parameters for the user.
++md5 - Use HMAC MD5 algorithm for authentication.
- -PASSWD - Authentication password for user.
- encrypted - Specifying password as md5 digests.
++auth - Authentication parameters for the user.
- -md5 - Use HMAC MD5 algorithm for authentication
+++PASSWD - Authentication password for user.
– operator - Operator user.
+v3 - User using v3 security model.
- auth - Authentication parameters for the user.
++md5 - Use HMAC MD5 algorithm for authentication.
- -PASSWD - Authentication password for user.
- encrypted - Specifying password as md5 digests.
++auth - Authentication parameters for the user.
- -md5 - Use HMAC MD5 algorithm for authentication.
+++PASSWD - Authentication password for user.
Default Setting
SNMP v2: enabled
SNMP v2 community: private rw,public ro,trap ro
SNMP v3: enabled