WESM zl Management and Configuration Guide WT.01.XX and greater

A-102
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
upd-server
This command configures autoinstall update server parameters. The no com-
mand negates this configuration.
Syntax
updserver (cfgfileloc | clustercfgfile | forceCfgDownload | imgfileloc | ip | unreachable)
• cfgfileloc Set config file location
– WORD Config file location
• clustercfgfile Set cluster config file location
– WORD Config file location
• forceCfgDownload Force the config update bypassing the check-
sum validation
• imgfileloc Set Image file location
– WORD Path of the Image file on ftp/tftp server
imgfilever Version of the image file
WORD Version string
• ip server ipaddress
– A.B.C.D ipaddress in A.B.C.D format
+ protocol autoinstall server protocol
- ftp FTP protocol
++ username server username
-- WORD username if applicable
+++ passwd server password
--- WORD password if applicable
- tftp TFTP protocol
• unreachable Set update server reachability
Default Setting
N/A
Command Mode
Support
Example
HPswitch#configure
HPswitch(config)#updserver imgfileloc tftp imgfilever 2
HPswitch(config)#