WESM zl Management and Configuration Guide WT.01.XX and greater

A-107
ProCurve Wireless Services zl Module Command Line Reference
Interface Commands
management
This command configures the selected interface as the management interface.
Syntax
management
Default Setting
N/A
Command Mode
Interface Configuration
Example
Related Commands
show management (page A-144)
mtu
This command sets the mtu value for the vlan interface.
Syntax
mtu (<512-1500>)
• <512-1500> - MTU in bytes.
Default Setting
N/A
Command Mode
Interface Configuration
Example
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#management
HPswitch(config-if)#
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#mtu 600
HPswitch(config-if)#