WESM zl Management and Configuration Guide WT.01.XX and greater

A-109
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
adopt-unconf-radio
This command adopts a radio even if its not yet configured. The default
templates are used for configuration. The no command negates this configu-
ration.
Syntax
adopt-unconf-radio (enable)
no adopt-unconf-radio enable
• enable - Enables the adoption of unconfigured radios.
Default Setting
N/A
Command Mode
Wireless Configuration
Example
adoption-pref-id
This command configures a preference identifier for this wireless module. All
radios configured with this preference identifier are more likely to be adopted
by this blade . The no command negates this configuration.
Syntax
adoption-pref-id
no adoption-pref-id
• <1-65535> - Assign the ID.
Default Setting
N/A
Command Mode
Wireless Configuration
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#adopt-unconf-radio enable
HPswitch(config-wireless)#