WESM zl Management and Configuration Guide WT.01.XX and greater

A-113
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
• filter-ageout - Se t the numbe r of sec onds to filte r a st at io n that
set off IDS.
– <0-65535> - Time in seconds.
Default Setting
N/A
Command Mode
Wireless Configuration
Example
Related Commands
show wireless ids (page A-168)
mac-auth-local
This command configures the local MAC authentication list. The no command
disables the configuration.
Syntax
mac-auth-local
no mac-auth-local
• <1-1000> - MAC Auth local entry.
– allow - Allow stations that match this rule to associate.
+MAC - Starting MAC address in AA-BB-CC-DD-EE-FF format.
- MAC - Ending MAC address in AA-BB-CC-DD-EE-FF format.
++WORD - A list (eg: 1,3,7) or range (eg: 3-7) of wlan indices.
– deny - Deny stations that match this rule to associate.
+MAC - Starting MAC address in AA-BB-CC-DD-EE-FF format.
- MAC - Ending MAC address in AA-BB-CC-DD-EE-FF format.
++WORD - A list (eg: 1,3,7) or range (eg: 3-7) of wlan indices.
Default Setting
Disabled
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#ids excessive-associations 500
HPswitch(config-wireless)#ids excessive-probes 400
HPswitch(config-wireless)#ids filter ageout 40
HPswitch(config-wireless)#