WESM zl Management and Configuration Guide WT.01.XX and greater

A-116
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices.
When a BSS is also specified, the first WLAN will be used as
the primary WLAN. When the auto option is used, the system
will automatically assign the first four WLANs as primaries
on their respective BSS.
– channel-power - Location, channel and transmit power level.
+indoor - Indoor location.
+outdoor - Outdoor location.
The indoor and outdoor parameters share these parameters:
-<1-200>- Channel number.
++<4-20 - Power in dBm.
-acs - Auto channel selection (radio will scan for the least
congested channel at startup or reconfiguration).
++<4-20> - Power in dBm.
-random - Random channel selection.
++<4-20 - Power in dBm.
– copy-config-from - Copies the configuration from a previously
configured radio.
+<1-1000> - A single radio index.
+default-11a - Default 11a configuration template.
+default-11bg - Default 11bg configuration template.
– detector - D ed icate s th is ra di o a s a de te c tor. No sta ti on s can
associate to a detector.
– dtim-period - DTIM period (number of beacons between succes-
sive DTIMs).
+<1-50> - DTIM period.
– max-stations - Maximum number of stations allowed to associate.
+<1-64> - Number of stations.
– reset - Resets a radio (this will only reset the specified radio,
not the complete radio-port).
– reset-rp - Resets the parent rp (this will reset all radios on that
radio-port).
– rts-threshold - RTS threshold.
+<100-2346> - RTS threshold in bytes.
– run-acs - Runs auto-channel-selection on a radio. The radio should
already have been configured for ACS.
– self-heal-offset - Configure the self-healing offset for regulatory.
+<0-65535> - The self-heal offset in dB.
– short-preamble - Short preamble.
– speed - Configures the basic and supported data rates / speed.