WESM zl Management and Configuration Guide WT.01.XX and greater

A-118
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
+WORD - 802.1X username.
-password - Specify the 802.1X password the radio-port must
use.
++WORD - 802.1X password.
Default Setting
Disabled
Command Mode
Wireless Configuration
Examples
Related Commands
show wireless radio statistics (page A-171)
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#radio 1 adoption-pref-id 5
HPswitch(config-wireless)#radio 1 antenna-mode diversity
HPswitch(config-wireless)#radio 1 beacon-interval 50
HPswitch(config-wireless)#radio 1 channel-power indoor acs
10
Regulatory parameter values depend on country of operation and radio
type.Refer to documentation for more regulatory information.
HPswitch(config-wireless)#radio 2 copy config-from default-
11a
HPswitch(config-wireless)#radio 1 max-stations 64
HPswitch(config-wireless)#radio 1 wmm background cw 3 5
HPswitch(config-wireless)#radio add 5 A1-B2-C3-D4-E5-F6 11bg
HPswitch(config-wireless)#radio configure-8021X username
manager password simple