WESM zl Management and Configuration Guide WT.01.XX and greater

A-119
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
self-heal
This command configures the self-healing commands. The no command
negates the configuration.
Syntax
self-heal (interference-avoidance| neighbor-recovery)
no self-heal
• interference-avoidance - Interference Avoidance configuration.
– enable - Enables/disables interference avoidance.
– hold-time - The number of seconds to disable interference avoid-
ance after a detection. This prevents a radio from changing
channels continuously.
+<0-65535> - A number of seconds between 0-65535.
– retries - The average number retries to cause a radio to re-run auto
channel selection.
+Number - A decimal number between 0.0 and 15.0.
• neighbor-recovery - Neighbor recovery configuration commands.
– action- R a d i o s e l f h e a l i n g a c t i o n w h e n n e i g h b o r s a r e d e t e c t e d
down.
+both - Raise the power to max and open all rates.
+none - Do nothing.
+open-rates - Open all rates.
+raise-power - Raise the power to max.
– enable - M o n i t o r r a d i o - p o r t s a n d a t t e m p t t o i n c r e a s e c o v e r a g e
on failure.
– neighbors - Add radios as neighbors.
+<1-1000> - A single radio index.
-<1-1000> - A single radio index.
– run-neighbor-detect - Disassociate all stations, clear current neig-
bors and run neighbor detection.
Default Setting
N/A
Command Mode
Wireless Configuration