WESM zl Management and Configuration Guide WT.01.XX and greater

A-124
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
+timeout - Time the wireless module waits for a response from the
radius server before retrying.
- <1-60> - Timeout in seconds.
++retransmit- Number of retries before the wireless module
will give up and disassociate the station.
- - <1-10> - Retry count.
– station - Modifies Radius/802.1X supplicant related parameters.
+timeout - Time the wireless module waits for a response from the
radius server before retrying.
- <1-60> - Timeout in seconds.
++retransmit- Number of retries before the wireless module
will give up and disassociate the station.
- - <1-10> - Retry count.
– SSID - The SSID of this WLAN.
+WORD - A string of up to 32 characters.
– vlan - The VLAN assignment of this WLAN.
+<1-4094> - A VLAN identifier <1-4094>.
– web-auth - Modify web-auth related parameters.
+allow-list - Modify web-auth white list parameters. Users who
have not yet authenticated will be allowed access to these IP
addresses.
-<1-10> - Allow-list Rule index (1-10).
++A.B.C.D - Allow-list IP address.
+radius - Modify web-auth radius server parameters. The param-
eter extensions are the same as previous listed under
“radius -
Modify Radius/802.1X related parameters.” on page A-123.
+webpage - Modify web-auth page parameters.
-external - Modify web-auth External page.
-internal - Modify web-auth Internal page.
The external and internal commands share these parameters:
++failure - Users are redirected to this webpage if they fail
authentication.
++login - Users are prompted for their username and pass-
word on this webpage.
++welcome - Users are redirected to this webpage after they
authenticate successfully.
The failure/login/welcome parameters share these parame-
ters: