WESM zl Management and Configuration Guide WT.01.XX and greater

A-125
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
- -description - Text that is displayed as the main body
(normal font, middle of page) of the webpage.
- -footer - Text that is displayed at the footer (smaller font,
bottom section ) of the webpage.
- -header - Text that is displayed as a header (large font,
top section) of the webpage.
- -main-logo - Main image (large size) that will be served
up by the local webpage. Appears between the header and
description on the webpage.
- -small-logo - Small image (thumbnail size) that will be
served up by the local webpage. Appears near the footer
on the webpage.
- -Title - Text that will be the title of the webpage.
+webpage-location - The location of the web pages to be used for
authentication. These pages can either be hosted on the wireless
module or on an external web server.
-external - Use login/welcome/failure Web pages on an external
server.
-internal - Use login/welcome/failure Web pages configured on
the wireless module.
– wep128 - Configure WEP128 parameters.
– wep64- Configure WEP64 parameters.
The wep128 and wep64 commands share these parameters:
+key - Configures pre-shared hex keys.
-<1-4> - Key index being configured.
++ascii - Keys as ascii characters (5 characters for wep64, 13
for wep128).
++hex - Keys as ascii characters (5 characters for wep64, 13
for wep128).
The hex and ascii commands share these parameters:
- -0 - Password is specified UNENCRYPTED.
+++WORD - Key (10 hex or 5 ascii characters for wep64,
26 hex or 13 ascii characters for wep128).
- -2 - Password is encrypted with password-encryption
secret.
+++WORD - Key (10 hex or 5 ascii characters for wep64,
26 hex or 13 ascii characters for wep128).
- -WORD - Key (10 hex or 5 ascii characters for wep64, 26
hex or 13 ascii characters for wep128).