WESM zl Management and Configuration Guide WT.01.XX and greater

A-126
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
+phrase - Specify a passphrase from which the keys are to be
derived.
-LINE - The passphrase between 4 and 32 characters long.
+web-default-key - Configures the transmit key index.
-<1-4>- The key index to be used for transmission from AP to
MU.
Default Setting
Disabled
Command Mode
Wireless Configuration
Examples
Related Commands
show wireless wlan statistics (page A-183)
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#wlan 1 enable
HPswitch(config-wireless)#wlan 1 ssid SAM
HPswitch(config-wireless)#wlan 1 encryption-type wep128
HPswitch(config-wireless)#wlan 1 authentication-type eap
HPswitch(config-wireless)#wlan 1 closed-system
HPswitch(config-wireless)#wlan 1 qos svp enable
HPswitch(config-wireless)#wlan 1 inter-station-blocking
HPswitch(config-wireless)#wlan 1 wep128 wep-default-key 4
HPswitch(config-wireless)