Wireless Edge Services xl Module Release Notes WS.01.05

3
Software Management
Software Index for ProCurve Networking Products
Saving the Current Configuration as the Start-Up Configuration
When you use the CLI to make a configuration change, the module places the change in the
running-config file. If you want to preserve the change across reboots, you must save the change to
the startup-config file. Otherwise, the next time the module reboots, the change will be lost.
To save configuration changes while using the CLI:
1. From the Wireless-Services Context:
ProCurve Switch 5304XL(wireless-services-B)#write memory
[OK]
ProCurve Switch 5304XL(wireless-services-B)#
2. Verify that the [OK] message displays, indicating that the configuration was saved successfully.
The current configuration is now saved as the startup configuration file, and the module will
execute the file at each power-up.
See the Management and Configuration Guide (5013-5912) for more information on managing
module configuration files.
Software Index for ProCurve Networking Products
Software
Letter
ProCurve Networking Products
C 1600M, 2400M, 2424M, 4000M, and 8000M
CY Switch 8100fl Series (8108fl and 8116fl)
E Switch 5300xl Series (5304xl, 5308xl, 5348xl, and 5372xl)
F Switch 2500 Series (2512 and 2524), Switch 2312, and Switch 2324
G Switch 4100gl Series (4104gl, 4108gl, and 4148gl)
H Switch 2600 Series, Switch 2600-PWR Series: H.07.81 and earlier, or H.08.55 and greater,
Switch 2600-8-PWR requires H.08.80 or greater.
Switch 6108: H.07.xx and earlier
I Switch 2800 Series (2824 and 2848)
J Secure Router 7000dl Series (7102dl and 7203dl)
K Switch 3500yl Series (3500yl-24G-PWR and 3500yl-48G-PWR), Switch 6200yl-24G, and
5400zl Series (5406zl, 5406zl-48G, 5412zl, and 5412zl-96G)
L Switch 4200vl Series (4204vl, 4208vl, 4202vl-72, and 4202vl-48G)