Wireless Edge Services xl Module Release Notes WS.01.11

6
Software Fixes
Release WS.01.11 Enhancements
ProCurve(wireless-services-A)(config)#exit
ProCurve(wireless-services-A) #write memory
After creating the restricted management VLAN33 (above), the show management command
displays the following:
ProCurve(wireless-services-A)#show management
Mgmt Interface: vlan33
Management access restricted to Mgmt Interface
When a restricted management VLAN is configured, management secure appears on a line in the
show running-config command output, as shown below:
ProCurve(wireless-services-A)(config)#sho run
!
! configuration of ProCurveWLANModule Wireless Services version WS.01.11!
version 1.0
!
management secure
.
.
.
Use the show management command (above) the see what VLAN is being used for the manage-
ment interface.
To remove a restricted management VLAN, enter the following command:
ProCurve(wireless-services-A)(config)#no management secure
ProCurve(wireless-services-A)(config)#show management
Mgmt Interface: vlan33
Management access permitted via any vlan interface
The VLAN previously used as the restricted management VLAN is displayed as the management
VLAN, but access is allowed from any VLAN.
Software Fixes
Release WS.01.03 was the first software release for the ProCurve Wireless Edge Services xl Module
(J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A).
Release WS.01.05
Problems Resolved in Release WS.01.05
■ Infrastructure (27200)—Interface's MTU size was not saved in the running config. Now
saved correctly.