Release Notes: Version WS.02.
© Copyright 2006 - 2007 Hewlett-Packard Development Company, LP. The information contained herein is subject to change without notice. Publication Number Part Number 5991-3775 December 2007 Applicable Product ProCurve Wireless Edge Services xl Module (J9001A) ProCurve Redundant Wireless Services xl Module(J9003A) Trademark Credits Microsoft®, Windows®, and Windows NT® are US registered trademarks of Microsoft Corporation. Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.
Contents Software Management Software Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Downloading Software and Documentation from the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Downloading Software to the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Saving Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Releases WS.02.08 — WS.02.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Release WS.02.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Release WS.02.12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Known Software Issues and Limitations Release WS.01.
Software Management Software Updates Software Management Software Updates Check the ProCurve Networking Web site frequently for software updates for the various ProCurve products you may have in your network. Downloading Software and Documentation from the Web You can download software updates and the corresponding product documentation from ProCurve Networking’s Web site as described below. To Download a Software Version: 1. Go to the ProCurve Networking Web site at: http://www.procurve.com. 2.
Software Management Saving Configurations Downloading Software to the Module C a u ti o n The startup-config file generated by the latest software release is compatible with the same file generated by earlier software releases. HP recommends that you backup your current configuration before performing any software update. See the Management and Configuration Guide (5013-5912) for instructions and more information.
Software Management Saving Configurations Saving the Current Configuration as the Start-Up Configuration When you use the CLI to make a configuration change, the module places the change in the running-config file. If you want to preserve the change across reboots, you must save the change to the startup-config file. Otherwise, the next time the module reboots, the change will be lost. To save configuration changes while using the CLI: 1.
Software Management ProCurve Switch, Routing Switch, and Router Software Keys ProCurve Switch, Routing Switch, and Router Software Keys Software Letter C 1600M, 2400M, 2424M, 4000M, and 8000M CY Switch 8100fl Series (8108fl and 8116fl) E Switch 5300xl Series (5304xl, 5308xl, 5348xl, and 5372xl) F Switch 2500 Series (2512 and 2524), Switch 2312, and Switch 2324 G Switch 4100gl Series (4104gl, 4108gl, and 4148gl) H Switch 2600 Series, Switch 2600-PWR Series: H.07.81 and earlier, or H.08.
Support Notes Release WS.02.07 Support Notes Support Notes are listed in chronological order, oldest to newest software release. To review the latest list of Support Notes associated with a release, begin with “Release WS.02.07” on page 5. Release WS.02.07 The Management and Configuration Guide (5013-5912, May 2007) has been updated with information on enhancements and new features in software release WS.02.07. To download this guide, see “Downloading Software and Documentation from the Web” on page 1.
Support Notes Release WS.02.07 Clear the Internet Explorer (IE) Browser Cache The following steps detail the process of clearing the cache in IE version 6. If you are using a different version, your steps might vary slightly. Follow these steps to clear the cache: 1. Open IE. Figure 1.
Support Notes Release WS.02.07 2. Select Tools > Internet Options. The Internet Options window is displayed. Click this button Figure 2. Tools > Internet Options 3. Make sure that you are in the General tab. 4. In the Temporary Internet files section, click Delete Files. The Delete Files window is displayed. Figure 3. Delete Files 5. Check the Delete all offline content box.
Support Notes Release WS.02.07 6. Click the OK button. 7. In the Internet Options window, click the OK button. Clear the Java Cache The following steps explain how to delete the cache for Sun Java version 1.5 or higher on a Windows XP machine. The steps vary depending on whether your Java version is above or below. See either: ■ “Clear the Cache for Sun Java Versions 1.5 and Higher” on page 8 ■ “Clear the Cache for Sun Java Versions Prior to 1.5” on page 11 Clear the Cache for Sun Java Versions 1.
Support Notes Release WS.02.07 Click this button Figure 5. Java Control Panel 3. In the Temporary Internet Files section, click the Settings button. The Temporary Files Settings window is displayed.
Support Notes Release WS.02.07 Click this button Figure 6. Temporary Files Settings (Java Control Panel) 4. Click the Delete Files button. The Delete Temporary Files window is displayed. Figure 7. Delete Temporary Files (Java Control Panel) 5. Make sure that the Applications and Applets box is checked. 6. Click the OK button. 7. In the Temporary Files Settings window, click the OK button. 8. In the Java Control Panel window, click the OK button.
Support Notes Release WS.02.07 Clear the Cache for Sun Java Versions Prior to 1.5. Follow these steps to delete the Java cache: 1. Select Start > Settings > Control Panel. Java Plug-in Option Figure 8. Control Panel 2. Select Java Plug-in. The Java Plug-in Control Panel window is displayed. Note If your workstation has more than one Java applet, the Control Panel will display multiple Java Plugin options. Complete the following steps for each to ensure that the correct cache is cleared. 3.
Support Notes Release WS.02.07 Click this button Figure 9. Java Plug-in Control Panel 4. You are prompted to confirm clearing the cache. Click the Yes button. Figure 10. Java Plug-in Confirmation Needed Screen 5. Click the Apply button; then close the screen. Restart the Browser You are now ready to access the Wireless Edge Services xl Module’s Web browser interface: 1. Close and re-open your browser. 2. Enter the IP address (or hostname) of your Wireless Edge Services xl Module in the browser. 3.
Support Notes Release WS.02.07 Figure 11. Activate the Java Applet 4. After about a minute, the Login screen is displayed. Figure 12. Login Screen for Wireless Edge Services xl Module Version 02.
Support Notes Release WS.02.07 Configuring Authentication for Web-Users Note Use this section to supplement the information in the chapter “Configuring the ProCurve Wireless Edge Services xl Module” of the Management and Configuration Guide (5013-5912, May 2007). Instead of (or in addition to) using the local list to authenticate users, you can use a RADIUS server. If the RADIUS server authenticates a user, that user has the rights configured on the RADIUS database.
Support Notes Release WS.02.07 If the server does not send the proper VSAs, the user receives the monitor role (read-only) to the Web browser interface. The module’s internal server does not support VSAs, so you should use the local server only to authenticate users that require read-only access. Note If you do not correctly configure the RADIUS server, you can lock yourself out of the Wireless Edge Services xl Module Web browser interface.
Enhancements Release WS.01.11 Enhancements Enhancements Unless otherwise noted, each new release includes the enhancements added in all previous releases. Enhancements are listed in chronological order, oldest to newest software release. To review the latest enhancements associated with a release, begin with “Release WS.02.07 Enhancements” on page 18. Release WS.01.11 Enhancements Release WS.01.
Enhancements Release WS.01.11 Enhancements To configure a restricted management VLAN, start at the Global Configuration level of the 5300xl CLI and enter the module’s CLI. In the following example, VLAN33 is set to be the specified management interface for the Wireless Edge Services xl module in chassis slot A. The write memory command saves the configuration.
Enhancements Release WS.02.07 Enhancements Release WS.02.07 Enhancements New and Enhanced Features Note The Management and Configuration Guide (5013-5912, May 2007) has been updated with information on the enhancements and new features in software release WS.02.07. Download this guide for more information. To download this guide, see “Downloading Software and Documentation from the Web” on page 1. New Features The following new features are available with release WS.02.07 software.
Enhancements Release WS.02.07 Enhancements Feature Description GRE tunnels A Generic Routing Encapsulation (GRE) tunnel can be established with another device for forwarding all WLAN traffic. Secure NTP Configure the module to take its time from an Network Time Protocol (NTP) server, or act as a secure NTP server for other devices. Web-Users accounts Create accounts for Web-Users, allow various levels of access to the module’s Web browser interface.
Software Fixes Release WS.01.05 Software Fixes Release WS.01.03 was the first software release for the ProCurve Wireless Edge Services xl Module (J9001A) and the ProCurve Redundant Wireless Services xl Module (J9003A). To review the list of fixes since the last general release published, begin with “Release WS.02.11” on page 22 and “Release WS.02.12” on page 26. Release WS.01.05 Problems Resolved in Release WS.01.05 ■ Infrastructure (27200) — Interface's MTU size was not saved in the running config.
Software Fixes Release WS.01.11 Release WS.01.11 Problems Resolved in Release WS.01.11 ■ Security (33010) — Module can be managed through non-management interfaces. This software change allows the management VLAN access to be restricted. ■ Security (35037) — Unable to block access to the management applet login screen from web-authentication clients. ■ Wireless (35851) — Broadcast-Multicast (BCMC) traffic was dropped when DTIM period is set to 1 resulting in SVP "push to talk" feature failure.
Software Fixes Releases WS.02.08 — WS.02.10 ■ SNMP (41244) — The following OID changes have occurred Deprecated OIDs: wsTrapWirelessIdsExcessiveAuthAssociation: 1.3.6.1.4.1.388.14.5.1.7.5.1 wsTrapEnableWirelessIdsExcsAuthAssoc: 1.3.6.1.4.1.388.14.5.1.7.5.2 wsTrapWirelessIdsExcessiveProbes: 1.3.6.1.4.1.388.14.5.1.7.5.3 wsTrapEnableWirelessIdsExcsProbes : 1.3.6.1.4.1.388.14.5.1.7.5.4 New (Added) OIDs: wsTrapEnableAllWirelessIdsTrap : 1.3.6.1.4.1.388.14.5.1.7.5.5 wsTrapDisableAllWirelessIdsTrap : 1.3.6.1.4.1.
Software Fixes Release WS.02.11 ■ Applet (40701) — The Web Management Interface becomes unresponsive if the user refreshes the alarm log more than 5 times when there are over 500 alarms present. ■ Applet (40908) — The Web Management Interface login page is displayed (and should not be) even when SNMPv3 is disabled.
Software Fixes Release WS.02.11 ■ Applet (42565) — The Web Management Interface does not allow changes to the GRE tunnel interface IP address. ■ Chassis (40486) — The running configuration on the module is not erased as it should be when the startup configuration of the chassis is erased and the host switch is reloaded. ■ CLI (41567) — The CLI fails to display buffered log messages when debug is enabled.
Software Fixes Release WS.02.11 ■ L2-L3 (41390) — When DHCP relay is configured on a VLAN that already has a scope and DHCP services defined, once the change is saved and followed by a module reload, the IP-helper setting is not successfully copied from the startup configuration to the running configuration. ■ L2-L3 (41309) — When a rule to apply ToS packet marking is added to an ACL that is applied to NAT, the NAT functionality fails.
Software Fixes Release WS.02.12 ■ Wireless (41324) — Access point detection requires that either the Single channel scan for Unapproved APs or Dedicate this Radio as a Detector is enabled in the radio configuration, but Single channel scan for Unapproved APs has no affect if the Self Healing feature is enabled. With this fix, rogue radios no longer show up when a radio port is part of a self-healing group unless single channel scan is enabled.
Known Software Issues and Limitations Release WS.01.05 Known Software Issues and Limitations This section identifies issues you may encounter when using a ProCurve Wireless Edge Services xl Module (J9001A) or a ProCurve Redundant Wireless Services xl Module (J9003A). To review the most recent list of issues and limitations since the last general release published, begin with “Release WS.02.11” on page 30 and “Release WS.02.12” on page 30. Release WS.01.
Known Software Issues and Limitations Release WS.02.07 ■ Applet (37818) — When the user leaves the DHCP Configuration page without saving changes, no warning message is displayed. ■ Applet (39451) — The user is unable to copy a configuration file from TFTP to the runningconfig. The recommended method for configuration file transfer is to copy to the startupconfig and reboot into the intended configuration.
Known Software Issues and Limitations Release WS.02.07 ■ Applet (38198) — The tab button does not allow the user to navigate from the DHCP Scope Start IP to the End IP field. ■ Applet (38133) — If invalid syntax is used to configure any of the Radio > Global Settings, a generic "communication error" message is sent to the web management interface.
Known Software Issues and Limitations Release WS.02.11 ■ Security (40983) — Pairwise Master Key (PMK) caching allows the module to store a station’s PMK after the station disassociates with a Radio Port so that the key remains in place if the station reassociates with a different Radio Port. If PMK caching is enabled, setting ACLs through ProCurve Identity Driven Manager (IDM) will not work. To use the ACL features in IDM, disable PMK caching.
© 2006 - 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
