Wireless Edge Services xl Module Release Notes WS.02.12

25
Software Fixes
Release WS.02.11
■ L2-L3 (41390) — When DHCP relay is configured on a VLAN that already has a scope and
DHCP services defined, once the change is saved and followed by a module reload, the
IP-helper setting is not successfully copied from the startup configuration to the running
configuration.
■ L2-L3 (41309) — When a rule to apply ToS packet marking is added to an ACL that is applied
to NAT, the NAT functionality fails.
■ L2-L3 (41612) — The ccsrvr process may crash and produce a core file when the
administrator is walking the MuProbeStatusTable.
■ Security (41760) — The module administrator is unable to access either the Web
Management Interface or the CLI when the RADIUS server host IP address is not reachable
for authentication of login credentials.
■ Security (41231) — A "Failed to save - Inconsistent Value" error message
may be displayed while attempting to attach an IP ACL to a VLAN; however, after hitting
cancel and refreshing the parent screen, the ACL attachment may indeed be present.
■ SNMP (41219) — In the Web UI, even after seeing confirmation that a valid config file
transfer to the startup-config file was successful, users may note after rebooting the WES
Module that the changes to startup-config were not truly saved.
■ SNMP (40842) — Configuration of an SNMPv3 manager for Web Management access may
cause the module to become unresponsive.
■ SNMP (40252) — The applet allows a different maximum number of SNMP trap receivers
than the CLI. This fix limits the total number of SNMP trap receivers to 10 addresses
regardless of the management access method.
■ SNMP (40867) — Adding an ACL with a space in the name fails and does not produce an
error message.
■ SNMP (42856, 42688) — The configuration of a 63-character WPA encryption passphrase
results in an error when attempted through the Web Management Interface.
■ Wireless (40242) — Wireless clients may intermittently fail WPA authentication with the
following message reported to syslog:
Station <mac address> failed dot11i tkip ccmp handshake on wlan <id>.
■ Wireless (41650) — L3 roaming may fail between two modules installed in different
switches when the host switches provide connections to multiple devices over physical links
that possess identical VLAN port assignments.
■ Wireless (41738) — The ProCurve IDM QoS setting is not properly marking packets when
layer 3 mobility is enabled on an SSID.
■ Wireless (41710) — The Radio Port 220 (J9005A) may become unresponsive when the
802.11bg radio is set to detector mode in Network Setup -> Radio -> Edit.