Wireless Edge Services zl Module Release Notes WT.01.03

Known Software Issues and Limitations

Release WT.01.03

■ Infrastructure (41564) — The Img-File-Ver parameter in the CLI and the corresponding

Management -> System Maintenance -> Update Server -> Software version parameter of the

web management application are not required values, and they should be. The image file will

not be pulled if the version is empty, even if the force-upload parameter is set.

■ Infrastructure (39890) — Neither the CLI nor the web management interface allow a

domain name string of more than 70 characters in the DHCP server scope configuration.

■ Infrastructure (40734) — System administrators logged in with operator privileges are

not able to execute the show run command at the CLI.

Workaround: view the running configuration from the web management interface.

■ Infrastructure (41442) — A socket error may be produced during use of the update server

function, though the feature is not affected by the error.

■ Infrastructure (1000459250) — VLAN statistics are not counting properly; both the web

management interface and CLI and under reporting inbound and outbound utilization.

■ L2-L3 (41762) — If a DHCP scope is configured on a VLAN that does not have an IP address,

the module will have to be restarted after the IP address is assigned to the VLAN in order to

allow the DHCP functionality to initialize properly.

Best Practice: Configure interfaces first, then configure the services that will be used by the

interfaces.

■ L2-L3 (40778) — The web management interface allows duplicate IP addresses to be set

for the DNS server, the default router, and the Netbios server settings. The CLI, given the

same parameters, appropriately triggers an error.

Best Practice: Review the running- or startup-config files for the validity of the IP addresses if

problems are encountered.

■ L2-L3 (38070) — The user is able to configure a DHCP excluded address that is already in

use by the static DHCP pool.

Workaround: Configure the DHCP range and exclusions prior to activating the DHCP server.

■ L2-L3 (39840) — A second default gateway configuration will not overwrite the originally

configured value, but will be ignored.

Workaround: Remove the default gateway address prior to configuring a new address.