Wireless Edge Services zl Module Release Notes WT.01.15

23
Known Software Issues and Limitations
Release WT.01.03
■ Applet (41215) — Since the ability to copy to the running-config has been removed from
the web management interface, the system: button should not be displayed on the
Management -> System Maintenance - Config File -> Transfer -> browse for location popup
window.
Workaround: Attempts at transferring to the file provide a meaningful message in the lower left
window of the web management interface.
■ Applet (41372) — After deleting a dynamic NAT entry and NAT interface from the web
management interface, the screen does not properly repaint the area where a popup dialog
box was placed.
■ Applet (41423) — A static NAT entry is deleted if one of the parameters is modified using
an invalid value.
Workaround: If you are having problems with static NAT entries being deleted immediately after
using the web management interface for configuration or modification, double check that all
your configured parameters are valid and view the configuration file to confirm that the intended
NAT rules are in place.
■ Applet (41504) — The web management interface fails to warn the user if an ACE (Access
Control Entry) that already exists is configured again. The ACE is appropriately disregarded
rather than saved, but the user is not informed about why this action occurred.
■ Applet (41751) — In the web management interface, the Transfer Files button is enabled
even when there are no core or panic files present.
■ Applet (41761) — When inserting DHCP IP address ranges (Network Setup -> DHCP Server
-> Configuration -> Add -> Included Ranges window of the web management interface), use
of the tab key cycles the curser between the Start IP and End IP fields without progressing
to other fields. The user will have to use the mouse to get to the other parameter fields.
■ Applet (41764) — The tab key does not allow the user to cycle through the various server
fields of the web management interface page for Network Setup -> DHCP Server ->
Configuration -> Add -> Servers fields. The user will have to use the mouse to progress
through the various parameter fields.
■ Applet (41992) — The web management interface's Device Information page erroneously
displays the Troubleshooting -> Panic Snapshot page. The trigger for this event is unknown.
■ Applet (41768) — There is inconsistent behavior between CLI and Applet while
configuring the preferred and alternate methods for user login. The Applet requires that both
a preferred and alternate method be specified, but the CLI does not have any requirement
for an alternate method.
■ Applet (38562) — The web management interface allows the universal broadcast address
(255.255.255.255) to be configured as a DNS IP address.
■ Applet (39807) — There should be an option to generate a Tech-Support file in the web
management application, and there is not.
Workaround: Generate this file using the CLI command. To do this using TFTP transfer, use the
following command syntax.