Wireless Edge Services zl Module Release Notes WT.01.15

3
Software Management
Saving Configurations
Saving the Current Configuration as the Start-Up Configuration
When you use the CLI to make a configuration change, the module places the change in the
running-config file. If you want to preserve the change across reboots, you must save the change to
the startup-config file. Otherwise, the next time the module reboots, the change will be lost.
To save configuration changes while using the CLI:
1. From the wireless-services context:
ProCurve Switch 5406zl(wireless-services-B)#write memory
[OK]
ProCurve Switch 5406zl(wireless-services-B)#
2. Verify that the [OK] message displays, indicating that the configuration was saved successfully.
The current configuration is now saved as the startup configuration file, and the module will
execute the file at each power-up.
See the module’s Management and Configuration Guide (5991-8626) for more information on
managing module configuration files.