Wireless Edge Services zl Module Release Notes WT.01.28

Support Notes and Clarifications

Release WT.01.28

Logging Aggregation Time

The operation of the Logging Aggregation Time parameter as described in the Management and

Configuration Guide and the Web interface Help require clarification.

Any message is immediately printed, unless it is identical to the previous one. If it is identical, then

a counter is incremented instead. If a different message arrives, then the accumulated count is printed

(%MGMT-4-V12AUTHERROR: Last message repeated x times), followed by the new message. If no

new message arrives within the “Logging Aggregation Time” of the last duplicate, then the

accumulated count is printed and the count is cleared.

Wireless Station Intrusion Detection Configuration

In Chapter 12 of the Management and Configuration Guide, the section “Configuring Thresholds

for Station Intrusion Detection” does not clearly specify when a violation is logged. In addition, the

Web Interface Help may incorrectly specify that a threshold must be exceeded to log a violation.

■ Violation Parameters: Station

Set the wireless station threshold value for each violation type. If exceeded, the wireless station

will be filtered and displayed within the Filtered wireless stations screen.

Note: Setting a violation parameter to 0 will disable the option.

■ Violation Parameters: Radio

Set the radio threshold value for each violation type. If met, the violation will be logged.

Note: Setting a violation parameter to 0 will disable the option.

■ Violation Parameters: Wireless Module

Set the wireless Module's threshold value for each violation type. If met, the violation will be

logged.

Note: Setting a violation parameter to 0 will disable the option.