Wireless Edge Services zl Module Release Notes WT.01.28

Software Fixes

Release WT.01.16

Release WT.01.16 was not a general release.

Problems resolved in Release WT.01.16

■ Infrastructure (PR_0000002266) — Configuration file may fail to load properly onto the

redundant module from the update server.

■ Security (PR_0000002283) — When using Web Authentication, a Guest group member

with valid credentials may not be allowed access to the network.

■ Applet (PR_0000002282) — When using the Web management interface to enter a domain

name in the Network Services > Internet Protocol > Global Settings tab, the change will not be

displayed on the CLI and will not be saved.

■ Infrastructure (PR_0000002284) — When using the CLI to reset all RPs adopted by a

module, an idmagent core file is generated in error. The module continues to work normally

after the core file is generated.

■ ESPD (PR_0000004548) — When PMK caching is enabled, and a client using WPA/WPA2

disconnects and ages out of the table, log messages like the following may be seen (date,

time, severity, and IP address stamps removed for clarity).

espd: ESPd_emi_req() - Invalid OpCode

■ Security (PR_0000000752, PR_0000002283) — When creating a guest account on the

module with local Radius and Web authentication, the start time for the guest account will

be 2 hours earlier than the actual local time, which results in a Web authentication failure.

Release WT.01.17

Release WT.01.17 was not a general release.

Release WT.01.18

Release WT.01.18 was not a general release.

Problems resolved in Release WT.01.18

■ Wireless (PR_0000004757) — Wireless clients stop getting an IP address from the DHCP

server after an extended period of time.

■ Wireless (PR_0000004761) — RPs transmitting bad radio types will cause WESM(s) to

reboot.

■ Infrastructure (PR_0000003687) — Module periodically loses configuration visually

through the CLI, but continues to operate normally until a reboot, which causes the

configuration to be lost.