Wireless Edge Services zl Module Release Notes WT.01.33

25
Software Fixes
Release WT.01.30
Web UI (PR_0000018380) — An incorrect row is reset after sorting the sFlow Receivers table and selecting the
reset button.
System (PR_0000039264) — IDM Attributes are not displayed correctly by the WESM in Wireless Stations
Information.
Authentication (PR_0000040149) — Key Name and Key Size fields are not grayed out when creating a new self
signed certificate using the Certificates Wizard.
VLAN (PR_0000040271) — Cannot tag the uplink port of the WESM on more than 64 VLANs.
Web UI (PR_0000040566) — When using the Web UI to select and delete multiple rows of a table, only the first
row is deleted.
Release WT.01.30
Release WT.01.30 was not a general release.
Problems resolved in Release WT.01.30
System (PR_0000044609) — After configuring an interface as the Management Interface, the interface will lose its
IP address.
Web Authentication (PR_0000039635) — Users connected to an 802.1X authentication SSID will experience loss
of connectivity, causing multiple sys-log messages indicating an "Invalid OpCode", eventually requiring a WESM
reboot.
CLI (PR_0000042088) — CLI command, "show wireless Radio Port" displays incorrect VLAN ids for adopted Radio
Ports.
System (PR_0000041083) — Reduced Broadcast Key Rotation intervals to a value of 5 minutes (300 seconds) to
prevent WPA-enabled stations from losing connection.
Time (PR_0000039627) — Timezone GMT offsets are not correct.
Web UI (PR_0000005513) — When using the Web UI to connect to the WESM and changing the IP address of the
management VLAN, an error message is displayed with incorrect information that the IP address is already assigned
to another virtual interface.
System Maintenance (PR_0000012043) — Unable to transfer a configuration file to NVRAM or system directories
unless the file already existed in these directories.
Web UI (PR_0000012157) — Secure NTP Status page always displays the Leap value as Synchronized, whether the
Secure NTP feature was configured or not.
Web UI (PR_0000042557) — In the Device Information screen, a wireless station's detailed information is not
refreshed after a parameter is changed.
CLI (PR_0000042699) — CLI command "archive tar /table" is not functioning properly; the WESM's CLI connection
is closed and the prompt reverts to the switch's CLI.
CLI (PR_0000042700) — CLI command, "archive tar /xtract" is not functioning properly when the tar file is stored
in the WESM's flash memory. The extracted Files directory is created but the files are not extracted.