Wireless Edge Services zl Module Release Notes WT.01.33

Software Fixes

Release WT.01.31

Release WT.01.31 was not a general release.

Problems resolved in Release WT.01.31

DHCP (PR_0000008356) — Internal DHCP Server does not provide IP addresses to wireless clients when a Host

Pool is created in a Network Pool and the remaining Network Pool IP addresses have been excluded.

Radius (PR_0000041880) — WES module not allowing wireless clients to authenticate from the Secondary RADIUS

Server (local) when the Primary RADIUS server is not available.

Syslog (PR_0000042414) — A time difference exists between the WES module's "real system time" and the

timestamp of event logs.

Radius (PR_0000043966) — Local RADIUS Server stops running when including double quotes in the group name.

For example, "Group".

Web UI (PR_0000042251) — When wireless client is running Mac OS X, the Web User Interface displays missing

labels on action buttons or the Web interface not completely loading.

Radio Adoption (PR_0000017877) — An existing Radio configuration (Radio Index and Radio MAC address) can

be overwritten via the CLI without receiving an error message.

VLAN (PR_0000044610) — An incorrect error message is displayed after configuring a VLAN as a Management

Interface within the Network Setup screen.

IP Addressing (PR_0000044611) — An incorrect error message is displayed after configuring a static VLAN

Interface IP address to use DHCP to obtain an IP address.

Release WT.01.32

Release WT.01.32 was not a general release.

Problems resolved in Release WT.01.32

File Handling (PR_0000012041) — When using the Web User Interface to transfer a large configuration file that

exceeds the module's available flash storage space, an incorrect status message that the file transfer was successful

is displayed, when in fact it is was not saved.

Encryption (PR_0000047389) — Editing an existing WEP 64 Pass key does not re-generate or become active after

pressing the Enter key. An incorrect status OK message is displayed. Existing wireless clients remain connected due

to the new Pass key not being generated and becoming active.

Encryption (PR_0000047390) — Editing an existing WEP 128 Pass key does not re-generate or become active after

pressing the Enter key. An incorrect status OK message is displayed. Existing wireless clients remain connected due

to the new Pass key not being generated and becoming active.

Web UI (PR_0000042652) — Configuring a friendly LLDP system name within Radio setup does not take effect

after pressing the OK button. Viewing the LLDP Remote Device Information Details from the CLI incorrectly displays

the Sys Name as a Hex number instead of the configured friendly LLDP system name.