Wireless Edge Services zl Module Release Notes WT.01.39

Support Notes and Clarifications

Release WT.01.28

Any message is immediately printed, unless it is identical to the previous one. If it is identical, then a counter is incremented

instead. If a different message arrives, then the accumulated count is printed (%MGMT-4-V12AUTHERROR: Last message

repeated x times), followed by the new message. If no new message arrives within the “Logging Aggregation Time” of the last

duplicate, then the accumulated count is printed and the count is cleared.

Wireless Station Intrusion Detection Configuration

In Chapter 12 of the Management and Configuration Guide, the section “Configuring Thresholds for Station Intrusion

Detection” does not clearly specify when a violation is logged. In addition, the Web Interface Help may incorrectly specify

that a threshold must be exceeded to log a violation.

■ Violation Parameters: Station

Set the wireless station threshold value for each violation type. If exceeded, the wireless station will be filtered and

displayed within the Filtered wireless stations screen.

Note: Setting a violation parameter to 0 will disable the option.

■ Violation Parameters: Radio

Set the radio threshold value for each violation type. If met, the violation will be logged.

Note: Setting a violation parameter to 0 will disable the option.

■ Violation Parameters: Wireless Module

Set the wireless Module's threshold value for each violation type. If met, the violation will be logged.

Note: Setting a violation parameter to 0 will disable the option.