Manualshelf

Wireless Edge Services zl Module Release Notes WT.01.39

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
11121314151617181920
16
Enhancements
Release WT.01.03 Enhancements
Enhancements
Unless otherwise noted, each new release includes the enhancements added in all previous releases. To review the
enhancements associated with the most recent general release, see “Release WT.01.20 Enhancements” on page 17.
Release WT.01.03 Enhancements
WT.01.03 is the first software version for Wireless Edge Services zl Modules.
Note The Management and Configuration Guide (5991-8626) provides detailed information on the features
in software release WT.01.03. Download this guide for more information. To download this guide, see
“Downloading Software and Documentation from the Web” on page 1.
Features
The following features are available with release WT.01.03 software. For more information, see the Management and
Configuration Guide (5991-8626) released with WT.01.03 (or later) software.
Table 14. Key Features in Version WT.01.03 Software
Feature Description
Layer 3 RP adoption Adopt Radio Ports (RPs) that are installed on a different subnetwork
Internal RADIUS server Authenticate users with an internal (built-in) RADIUS server.
Firewall Filter routed traffic through an internal firewall.
IP and MAC ACLs Control traffic to and from wireless stations through Access Control Lists (ACLs) based on IP and MAC
addresses.
Network Address Translation (NAT) Provide Network Address Translation (NAT) services for traffic routed between two subnetworks,
typically between the wireless and wired network.
Internal DHCP server Provide DHCP services for wireless clients on a VLAN.
Fast Layer 2 roaming between modules Wireless stations can disassociate with one Radio Port, and quickly reassociate with a different Radio
Port under the control of the same module.
Layer 3 mobility Wireless stations can disassociate with one Radio Port, and quickly reassociate with a different Radio
Port under the control of different modules in the same Layer 3 mobility domain.
sFlow support A module’s sFlow agent monitors each radio and samples wireless traffic for an sFlow collector.
Secure NTP Configure the module to take its time from an Network Time Protocol (NTP) server, or act as a secure
NTP server for other devices.
Web-Users accounts Create accounts for Web-Users, allow various levels of access to the module’s Web browser interface.
ProCurve Identity Driven Manager (IDM) QoS Supports Quality of Service (QoS) settings created through IDM.