Wireless Edge Services zl Module Release Notes WT.01.39

Software Fixes

Release WT.01.14

■ Wireless (46290) — The station probe table was added for support of ProCurve MM 2.0 Automatic Update 1 (AU1)

and its Location Confidence feature. For more information, see “Release WT.01.13 Enhancements” on page 17.

Release WT.01.14

Release WT.01.14 was not a general release.

Release WT.01.15

Release WT.01.15 was a general release.

Problems resolved in Release WT.01.15

■ Wireless (00677) — An incorrect RSSI value is displayed in response to an SNMP walk.

■ Wireless (00681) — All the wireless stations in the Probe list inaccurately report the same RSSI.

■ Wireless (01085) — CPU utilization in the module may approach 100% the day following application of ProCurve's

Mobility Manager 2.0 Automatic Update 1 (AU1) release.

■ Wireless (14986) — A faulty radio port may trigger repeated reboots due to the module experiencing ccserver

crashes. This fix prevents the module from adopting faulty radio ports.

■ Wireless (46457, 46292, 46295) — Release WT.01.15 may be used with WESM zl modules purchased prior to, or

after, April 1, 2008, in the European Union and selected countries/regions with channel restrictions as described

below.

Regulatory restriction re-imposed as in WT.01.10: In the European Union and selected countries/regions (including

South Africa, Turkey, Morocco, and Croatia), HP Wireless Edge Services Modules, Access Points and Radio Ports

purchased after April 1, 2008, are subject to new radar interference requirements that limit the available channels in the

5 GHz band. To comply with these new requirements, the operating channels impacted by this change have been removed.

The available 5 GHz channels are now 36, 40, 44 and 48 (5.150 - 5.250 GHz).

Release WT.01.16

Release WT.01.16 was not a general release.

Problems resolved in Release WT.01.16

■ Infrastructure (PR_0000002266) — Configuration file may fail to load properly onto the redundant module from

the update server.

■ Security (PR_0000002283) — When using Web Authentication, a Guest group member with valid credentials may

not be allowed access to the network.

■ Applet (PR_0000002282) — When using the Web management interface to enter a domain name in the Network

Services > Internet Protocol > Global Settings tab, the change will not be displayed on the CLI and will not be saved.

■ Infrastructure (PR_0000002284) — When using the CLI to reset all RPs adopted by a module, an idmagent core

file is generated in error. The module continues to work normally after the core file is generated.

■ ESPD (PR_0000004548) — When PMK caching is enabled, and a client using WPA/WPA2 disconnects and ages out

of the table, log messages like the following may be seen (date, time, severity, and IP address stamps removed for

clarity).

espd: ESPd_emi_req() - Invalid OpCode