Wireless Edge Services zl Module Release Notes WT.01.39

Software Fixes

Release WT.01.28

■ ACL (PR_0000019095) — When configuring ACLs in a RADIUS server, if an ACE has a range of ports with spaces

around the hyphen, the server will fail to authenticate the user, even when the ACE is valid.

■ Web UI (PR_0000018220) — Within the Network Setup > Ethernet page, sorting VLANs by selecting the IP Address or

Subnet Mask column headings does not work.

■ Upgrade (PR_0000017696) — After a software upgrade, the WESM displays an “upgrade has been completed”

message, but does not indicate that a WESM reboot is required to complete the upgrade.

Release WT.01.28

Release WT.01.28 is a general release and includes software fixes for all prior releases.

Release WT.01.29

Release WT.01.29 was not a general release.

Problems resolved in Release WT.01.29

■ Web UI (PR_0000016366) — System Name had different restrictions when being set through the Web UI and CLI.

The CLI required a letter as the first character and did not accept spaces in the System Name.

■ Web UI (PR_000018221) — Web UI displays different results from the CLI when the same SNMP Access Control

is configured with two different community names.

■ CLI (PR_0000018295) — When using the same community name, the Web UI functioned correctly but the CLI

would not allow the use of the same community name and displayed the error message: "%Error: Community

string already in use".

■ Authentication (PR_0000040156) — Web User Authentication against an external RADIUS Server does not work

when the 'Number of Retries to communicate with RADIUS Server' value is set to 0.

■ CLI (PR_0000037878) — The 'edit' command under the CLI does not function properly.

■ System Maintenance (PR_0000017549) — When a software image has been upgraded to the WESM and the WESM

has not been reloaded, if a second image is upgraded or the upgrade process is aborted before completion, the WESM

will not be accessible via Web UI or CLI.

Workaround: The WESM module must be removed from the switch chassis and then re-inserted into the chassis, or the

switch must be power cycled.

■ SNMP (PR_0000017878) — Radio description could be incorrectly configured as blank via SNMP.

■ Web UI (PR_0000040129) — Unable to clear the IP address and subnet mask values from any interface when using

the Web UI. The CLI functions correctly.

■ System (PR_0000041085) — Increased the allotted size of log message table.

■ Authentication (PR_0000001238) — The same RADIUS server IP address can be entered multiple times in the

Radius server IP table.

■ Alarm Log (PR_0000040265) — When in the Alarm Log and attempting to display alarm details, the Detail button

generates the following error message: "Failed to get the alarm details. Please retry".

■ CLI (PR_0000039943) — The CLI #diff startup-config running-config command does not display the difference

between the configuration files.

■ Reports (PR_0000006376) — Column titles of the Network Statistics report does not match the labels in the Graphs

and Detailed Information screens.