Wireless Edge Services zl Module Release Notes WT.01.39

Known Software Issues and Limitations

Release WT.01.03

%PM-4-PROCNORESP: Process "isDiag" is not responding (2/20)

%PM-4-PROCNORESP: Process "snmpd" is not responding (2/20)

%PM-4-PROCNORESP: Process "fileMgmt" is not responding (1/20)

%PM-4-PROCNORESP: Process "radconfd" is not responding (1/20)

%PM-4-PROCNORESP: Process "imi" is not responding (1/20)

%PM-4-PROCNORESP: Process "ccstatsd" is not responding (1/20)

%PM-4-PROCNORESP: Process "isDiag" is not responding (1/20)

%PM-4-PROCNORESP: Process "snmpd" is not responding (1/20)

%USER-5-NOTICE: WIOS_SNMP[961]: user ezhil login

■ Infrastructure (39875) — Alternate (secondary) methods of user login are designed to function when the primary

method is unreachable - not when the primary method fails.

■ Infrastructure (41564) — The Img-File-Ver parameter in the CLI and the corresponding Management -> System

Maintenance -> Update Server -> Software version parameter of the Web management application are not required

values, and they should be. The image file will not be pulled if the version is empty, even if the force-upload parameter

is set.

■ Infrastructure (39890) — Neither the CLI nor the Web management interface allow a domain name string of more

than 70 characters in the DHCP server scope configuration.

■ Infrastructure (40734) — System administrators logged in with operator privileges are not able to execute the

show run command at the CLI.

Workaround: view the running configuration from the Web management interface.

■ Infrastructure (41442) — A socket error may be produced during use of the update server function, though the

feature is not affected by the error.

■ Infrastructure (1000459250) — VLAN statistics are not counting properly; both the Web management interface

and CLI and under reporting inbound and outbound utilization.

■ L2-L3 (41762) — If a DHCP scope is configured on a VLAN that does not have an IP address, the module will have

to be restarted after the IP address is assigned to the VLAN in order to allow the DHCP functionality to initialize

properly.

Best Practice: Configure interfaces first, then configure the services that will be used by the interfaces.

■ L2-L3 (40778) — The Web management interface allows duplicate IP addresses to be set for the DNS server, the

default router, and the Netbios server settings. The CLI, given the same parameters, appropriately triggers an error.

Best Practice: Review the running- or startup-config files for the validity of the IP addresses if problems are encountered.

■ L2-L3 (38070) — The user is able to configure a DHCP excluded address that is already in use by the static DHCP

pool.

Workaround: Configure the DHCP range and exclusions prior to activating the DHCP server.

■ L2-L3 (39840) — A second default gateway configuration will not overwrite the originally configured value, but will

be ignored.

Workaround: Remove the default gateway address prior to configuring a new address.

■ L2-L3 (41737) — Attaching an IP ACL with an allow any ACE to the downlink port stops all the traffic on the

downlink, even if there is a MAC extended ACL to explicitly allow ARPs.

Workaround: ACLs attached to the downlink port need to explicitly allow the radio port traffic to get through to the

module, as shown by a portion of a show run command below.

ip access-list extended 100

permit ip any any rule-precedence 1

mac access-list extended 200