Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-42
Configuring the ProCurve Wireless Services xl Module
System Maintenance
Viewing the Software Images
To view the version of the primary and secondary images, access the Manage-
ment > System Maint.—Software screen. (See Figure 2-25.)
Figure 2-25. Management > System Maint.—Software Screen
The Management > System Maint.—Software screen includes the following
fields:
■ Image—This field indicates if the image is the primary or secondary
image.
■ Version—This field displays the version number of the image file.
■ Current Boot—This field indicates whether or not the image was used
the last time that the Wireless Edge Services xl Module was rebooted. A
green check mark indicates the image was used; a red x indicates the
image was not used.