Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-44
Configuring the ProCurve Wireless Services xl Module
System Maintenance
Changing the Image Failover Setting
When the Wireless Edge Services xl Module reboots, it attempts to initialize
the software image you have selected for the next reboot. If this attempt fails,
the module tries one more time to initialize the software image. If this second
consecutive attempt fails, by default the module automatically reboots using
the other software image.
If you do not want the Wireless Edge Services xl Module to automatically
reboot using the other image, you can disable this failover capability:
1. Click Management > System Maint.—Software.
Figure 2-27. Management > System Maint.—Software Screen
2. Click the Global Settings button at the bottom of the screen.