Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-46
Configuring the ProCurve Wireless Services xl Module
System Maintenance
Figure 2-29. Upgrade Software Image Screen
4. In the From field, accept the default setting, Server.
5. In the File field, enter the name of the new image file.
6. In the Using field, use the drop-down menu to select FTP or TFTP,
depending on the type of server you have.
7. In the IP Address field, enter the IP address of the FTP or TFTP server.
8. If you are using an FTP server, enter the login credentials for that server.
a. In the User ID field, enter the username.
b. In the Password field, enter the password for that username.
9. In the Path field, enter the path where the new image file is saved. If you
are using an FTP server and the image file is saved at the server’s root
level, enter a period followed by a slash (./). If the image file resides at a
different level on the FTP server, enter the complete path. (If you are using
a TFTP server, this field may not be required.)
10. Click the Do Upgrade button.