Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-61
Configuring the ProCurve Wireless Services xl Module
System Maintenance
6. Configure the version number, filename and path for the software image.
a. In the Version field under Software, enter the version of the software
image that is stored on the FTP or TFTP server.
b. In the File Name (with Path) field, enter the name of the file that
contains the software image and the path to that filename (if the path
is required by the Update Server). If you are using an FTP server and
the configuration file is saved at the server’s root level, enter a period
followed by a slash (./) for the path. If the configuration file resides
at a different level on the FTP server, enter the complete path. (If you
are using a TFTP server, this field may not be required.)
7. In the File Name (with Path) field, enter the name of the file that contains
the configuration and the path to that filename (if the path is required by
the Update Server).
8. Click the Apply button to save your changes to the running-config.
9. Click the Save button in the navigation bar to save your changes to the
startup-up config.