Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-62

Configuring the ProCurve Wireless Services xl Module

SNMP Traps and Error Reporting

By default, the Wireless Edge Services xl Module supports SNMP v1, v2, and

v3. To view these default settings, click Management in the left navigation bar.

(See Figure 2-37.)

Figure 2-37. Management Screen

In addition to providing support for SNMP applications, SNMP v3 is required

for the Web browser interface to function. If you attempt to disable support

for SNMP v3 (by removing the checkmark from the Enable SNMP v3 box on

the Management screen), a warning message is displayed. Disabling SNMP v3

also disables the applet required for the Web browser interface, and you will

be logged out. You will be unable to access the Web browser interface until

you enable SNMP v3 again.