Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.01.03 or greater

2-67
Configuring the ProCurve Wireless Services xl Module
SNMP Traps and Error Reporting
3. In the Old Password field, enter the current password.
4. In the New Password and Confirm New Password fields, enter the new
password.
5. Click the OK button.
If you change the password for the manager user, you are logged out of the
Web browser interface and must enter the new password to log back in to the
interface.
SNMP Statistics
You can view a number of SNMP statistics. To understand these statistics, you
should know the five basic messages exchanged between SNMP servers and
agents:
■ GET—SNMP servers send a GET message to request information about
a setting.
■ GET-NEXT—SNMP servers send a GET-NEXT message to request infor-
mation about several SNMP objects in the device.
■ SET—SNMP servers send a SET message to modify a configuration
setting. Servers must have read-write access to make configuration
changes.
■ GET-RESPONSE—In response to a GET, GET-NEXT, or SET message,
SNMP agents send a GET-RESPONSE message. This message includes
one of the following:
• requested information
• confirmation that the requested change was made
• error that explains why the agent cannot supply the requested infor-
mation or make the requested change
■ TRAP—SNMP agents use TRAP messages to report events.
Many SNMP statistics reference these messages.
To view SNMP statistics, click Management > SNMP Access and select the
Statistics tab.